Products
Heat Resistant Corrosion Resistant 316L Stainless Steel Filter Element
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
Description
marker
Product Description
316L stainless steel filter element for beer wort aeration, with quick release clamp connection, custom made.
— Diameter: 4–450 mm
— Length: 20–1500 mm
— Porosity: 30–40%
— Filtration fineness: 0.22–100 microns
Applications:
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering. It has high mechanical strength, heat resistance, excellent corrosion resistance, uniform pore distribution, good air permeability, cleanability and regeneration ability, weldability and machinability. These products are widely used for filtration and separation of gases and liquids in industries such as catalyst recovery, petroleum, chemical, pharmaceutical, food, beverage, metallurgy, environmental protection and fermentation industries, such as: coarse and fine filtration of liquids - pharmaceutical solutions, oils, beverages, mineral water, etc.; cleaning from dust, bacteria and oil mist of various gases and vapors; noise suppression, flame suppression, gas buffering, etc.
Product characteristics:
1. Shape stability, impact resistance and resistance to alternating loads are superior to other metal filter materials.
2. Stable air permeability and separation efficiency.
3. High mechanical strength, suitable for use in high temperature, high pressure and severe corrosion environments.
4. Particularly recommended for filtering hot gases (permissible temperature up to 500°C).
contact us
Related Popular Products
Protective housing of the temperature and humidity sensor - sintered filter element made of stainless steel powder
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
High performance filter
High performance filter designed for large diameter pipelines and high flow rates. It uses a stainless steel pleated filter element as a filter element, the filtration area of which is many times larger than the area of conventional perforated basket filter elements and rod pleated filter elements of competitors.
Electrically heated breathing filter
The automatic breathing filter with heating and temperature control is designed in strict accordance with GMP requirements and is a high-tech product independently developed and manufactured by Wenzhou Weixian Light Machinery Co.,Ltd.
Side loading bag filter
Characteristics The bag filters are entirely made of high quality stainless steel...
Pleat filter element made of polyvinylidene fluoride
The filtration membrane is made of polyvinylidene fluoride (PVDF). The structure with an internal support frame made of polypropylene or stainless steel is assembled by heat welding. The membrane has a unique pore shape, high resistance to contamination, resistance to acids and alkalis, and is suitable for gas filtration.
Multi-cartridge microporous filter
The internal surface of the hygienic microporous membrane filter is mirror polished, which reduces the accumulation of contaminants and makes cleaning easier.
Titanium rod filter
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Breathing filter
The breathing filter is specially designed and manufactured to ensure sterility during gas exchange in the pharmaceutical and food industries.
Safety fine filter
This filter consists of a cylindrical body and a tube grid. Micropores in the tube sheet are formed by polyethylene (PE) tubes located in it. The filter is assembled in a sealed cylindrical housing. The filtered medium enters the housing through the side inlet and is cleaned through filter tubes, after which the liquid is discharged through the lower pipe.
Filter element made of five-layer sintered mesh
The standard five-layer sintered mesh filter element is manufactured primarily by winding filter material based on a standard five-layer sintered mesh.
Three-in-one filter disc - filtration, washing, drying
The three-in-one filter disc for pharmaceutical equipment is a filter element that provides filtration, rinsing and drying (three in one).
Top loading bag filter
Characteristics The bag filters are entirely made of high quality stainless steel...
Composite sintered mesh with perforated sheet
Perforated sheet sintered mesh is a new type of filter media made by composite sintering a perforated sheet of standard material (304 or 316L stainless steel) and multiple layers of square mesh (or twill weave) into a single piece.
Mobile filter
The horizontal bed sheet filter has a long history of use in food and beverage filtration. This filtration method belongs to depth filtration technology and is a modular closed system, especially suitable for low and medium flow rates.
Single bag filter
Characteristics The bag filters are entirely made of high quality stainless steel...
Metal filter bag (dust collection of flue gases at temperatures up to 450°C)
High Temperature Metal Filter Bag (Heat Resistant Metal Fiber Filter Bag, Metal Dust Collection Bag) - The filter material is made by non-woven sheeting and sintering of metal fibers, followed by welding the metal fiber filter cloth into the shape of a bag.
