Products
316L stainless steel filter element for beer wort aeration
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
Description
marker
Product Description
316L stainless steel filter element for beer wort aeration, with quick release clamp connection, custom made.
— Diameter: 4–450 mm
— Length: 20–1500 mm
— Porosity: 30–40%
— Filtration fineness: 0.22–100 microns
Applications:
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering. It has high mechanical strength, heat resistance, excellent corrosion resistance, uniform pore distribution, good air permeability, cleanability and regeneration ability, weldability and machinability. These products are widely used for filtration and separation of gases and liquids in industries such as catalyst recovery, petroleum, chemical, pharmaceutical, food, beverage, metallurgy, environmental protection and fermentation industries, such as: coarse and fine filtration of liquids - pharmaceutical solutions, oils, beverages, mineral water, etc.; cleaning from dust, bacteria and oil mist of various gases and vapors; noise suppression, flame suppression, gas buffering, etc.
Product characteristics:
1. Shape stability, impact resistance and resistance to alternating loads are superior to other metal filter materials.
2. Stable air permeability and separation efficiency.
3. High mechanical strength, suitable for use in high temperature, high pressure and severe corrosion environments.
4. Particularly recommended for filtering hot gases (permissible temperature up to 500°C).
Interface Specifications
contact us
Related Popular Products
Economical polypropylene pleated filter element
The filtration membrane and housing are made of polypropylene and connected by heat sealing. Carries out depth filtration, has a low cost and a favorable price-quality ratio, suitable for filtration of liquids and gases.
Titanium rod filter
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Safety fine filter
This filter consists of a cylindrical body and a tube grid. Micropores in the tube sheet are formed by polyethylene (PE) tubes located in it. The filter is assembled in a sealed cylindrical housing. The filtered medium enters the housing through the side inlet and is cleaned through filter tubes, after which the liquid is discharged through the lower pipe.
Breathing filter
The breathing filter is specially designed and manufactured to ensure sterility during gas exchange in the pharmaceutical and food industries.
Single cartridge membrane microporous filter
XHFILTER is a microporous pleated filter made entirely of SUS316L or SUS304 stainless steel, with a pleated filter element as the filter element.
316 Stainless Steel Water Distribution Mesh for Coffee
When brewing specialty coffee, the “secondary distribution grid” is a design element that is often mentioned, but few people fully understand its purpose.
Filter without residual liquid
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Sintered titanium powder filter element
Titanium rod filter elements (tubular and tile) are made from industrial high-purity titanium powder (99.4%).
Electrically heated breathing filter
The automatic breathing filter with heating and temperature control is designed in strict accordance with GMP requirements and is a high-tech product independently developed and manufactured by Wenzhou Weixian Light Machinery Co.,Ltd.
Hydrophobic pleated filter element made of polytetrafluoroethylene
The filtration membrane is made of polytetrafluoroethylene (PTFE). The structure with an internal support frame made of polypropylene or stainless steel is assembled using heat welding. The membrane has natural hydrophobicity, is resistant to strong acids and alkalis, high temperatures and ozone, and is designed for gas filtration.
Fittings
Main products: Quick release ball valve; hygienic ball valve; quick release Y-o...
Sintered metal powder filter disc
Powder sintered filtration materials (tubular and slab) are microfiltration elements made from titanium powder Ti and stainless steel grades 304, 304L, 316, 316L by fractionation, molding and sintering.
Tilting titanium rod filter
The filter housing is made of 304 or 316L stainless steel. The filter is resistant to high temperatures, high pressure, corrosion from strong acids and alkalis; The filter element can be used repeatedly.
Stainless steel sintered felt pleated filter element - for melts, steam, heat resistant, high porosity
The main filter material of the pleated sintered felt filter element is sintered felt made of stainless steel fiber. Sintered felt made of stainless fiber is used as the core filter layer.
Pipe filter
The filter is a compact device for removing small amounts of solid particles from liquids and is designed to protect compressors, pumps, instrumentation and other equipment, ensuring their normal operation.
Hydrophilic pleated filter element made of polytetrafluoroethylene
The filtration membrane is made of hydrophilic polytetrafluoroethylene (PTFE). The product is assembled by heat welding with an internal support frame made of polypropylene or stainless steel. The hydrophilic membrane is resistant to strong acids and alkalis, high temperatures and ozone, suitable for clarifying and sterilizing filtration of highly corrosive, highly oxygenated liquids and organic solvents.
