Products
Folded sintered mesh filter element
Stainless steel pleated filter element, also known as melt-filter element. The main filter materials of this filter element are stainless woven mesh and sintered felt made of stainless fiber.
Description
marker
Product Description
Stainless steel pleated filter element, also known as melt-filter element. The main filter materials of this filter element are stainless woven mesh and sintered felt made of stainless fiber. Stainless woven mesh is made by weaving stainless wire; a pleated filter element based on it has such characteristics as smooth pore channels, easy cleaning, heat resistance, corrosion resistance, no mesh peeling and a long filtration cycle. Sintered stainless fiber felt is a porous depth filter material made by high-temperature sintering of stainless steel fibers; a pleated filter element based on it is characterized by high porosity, good air permeability, high dirt holding capacity and good regenerability.
Main Features
1. Large filtration area (5–10 times larger than the area of a conventional cylindrical filter element).
2. Wide range of filtration fineness (1–300 microns).
Basic types of connections
1. Standard connection sizes (for example, 222, 220, 226).
2. Quick release connection.
3. Threaded connection.
4. Flange connection.
5. Connection using traction.
6. Customized special connection.
Applications
Mainly used for filtration of high molecular weight polymers, water-oil mixtures, hot gases, pharmaceuticals and other media.
contact us
Related Popular Products
Stainless steel sintered felt pleated filter element - for melts, steam, heat resistant, high porosity
The main filter material of the pleated sintered felt filter element is sintered felt made of stainless steel fiber. Sintered felt made of stainless fiber is used as the core filter layer.
316 Stainless Steel Water Distribution Mesh for Coffee
When brewing specialty coffee, the “secondary distribution grid” is a design element that is often mentioned, but few people fully understand its purpose.
Single cartridge membrane microporous filter
XHFILTER is a microporous pleated filter made entirely of SUS316L or SUS304 stainless steel, with a pleated filter element as the filter element.
Mobile filter
The horizontal bed sheet filter has a long history of use in food and beverage filtration. This filtration method belongs to depth filtration technology and is a modular closed system, especially suitable for low and medium flow rates.
Fittings
Main products: Quick release ball valve; hygienic ball valve; quick release Y-o...
Titanium rod filter
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Electrically heated breathing filter
The automatic breathing filter with heating and temperature control is designed in strict accordance with GMP requirements and is a high-tech product independently developed and manufactured by Wenzhou Weixian Light Machinery Co.,Ltd.
Heat Resistant Corrosion Resistant 316L Stainless Steel Filter Element
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
Flat aerator
The product is made by welding from a spherical titanium aeration disk, a dense titanium plate and a dense titanium fitting. The spherical titanium aeration disc is sintered from high-purity titanium powder.
Safety fine filter
This filter consists of a cylindrical body and a tube grid. Micropores in the tube sheet are formed by polyethylene (PE) tubes located in it. The filter is assembled in a sealed cylindrical housing. The filtered medium enters the housing through the side inlet and is cleaned through filter tubes, after which the liquid is discharged through the lower pipe.
Filter element made of five-layer sintered mesh
The standard five-layer sintered mesh filter element is manufactured primarily by winding filter material based on a standard five-layer sintered mesh.
Pipe filter
The filter is a compact device for removing small amounts of solid particles from liquids and is designed to protect compressors, pumps, instrumentation and other equipment, ensuring their normal operation.
Hydrophilic pleated filter element made of polytetrafluoroethylene
The filtration membrane is made of hydrophilic polytetrafluoroethylene (PTFE). The product is assembled by heat welding with an internal support frame made of polypropylene or stainless steel. The hydrophilic membrane is resistant to strong acids and alkalis, high temperatures and ozone, suitable for clarifying and sterilizing filtration of highly corrosive, highly oxygenated liquids and organic solvents.
Hydrophobic pleated filter element made of polytetrafluoroethylene
The filtration membrane is made of polytetrafluoroethylene (PTFE). The structure with an internal support frame made of polypropylene or stainless steel is assembled using heat welding. The membrane has natural hydrophobicity, is resistant to strong acids and alkalis, high temperatures and ozone, and is designed for gas filtration.
Corrosion-resistant cartridge filter with fluoroplastic lining
PTFE-lined stainless steel filters are specially designed for filtering highly acidic, highly alkaline and other highly corrosive liquids. All parts of the filter in contact with the liquid are fully lined with PTFE to protect the stainless steel from corrosion.
Flat aerator
The product is composed of titanium filter plate, 316L stainless steel body, 316L stainless steel flange and aerator O-ring.
