Products
Safety fine filter
This filter consists of a cylindrical body and a tube grid. Micropores in the tube sheet are formed by polyethylene (PE) tubes located in it. The filter is assembled in a sealed cylindrical housing. The filtered medium enters the housing through the side inlet and is cleaned through filter tubes, after which the liquid is discharged through the lower pipe.
Description
marker
Description
This filter consists of a cylindrical body and a tube grid. Micropores in the tube sheet are formed by polyethylene (PE) tubes located in it. The filter is assembled in a sealed cylindrical housing. The filtered medium enters the housing through the side inlet and is cleaned through filter tubes, after which the liquid is discharged through the lower pipe. The sediment is removed using the "compressed air backwash" or "combined gas-liquid backwash" method. The filter is widely used in the chemical, pharmaceutical, textile, metallurgical, mechanical engineering, electroplating and other industries, as well as for water or wastewater filtration, fine filtration or re-fine filtration of liquids, solutions, etc. Fine filters are manufactured according to individual customer requirements.
Main technical parameters
Design pressure: 0.75–1.6 MPa
Design temperature: 20°C – 120°C
Seal type: O-rings and flat gaskets
Seal material: nitrile rubber, silicone rubber, fluorine rubber; standard equipment - silicone seal
Connection type: threaded, clamp, flanges according to GB, HG, DIN, ANSI, JIS standards
Compatible filter elements: flat end, also with connection sizes 222 and 226
Surface treatment: matte painting, mirror polishing, electropolishing
Filtration fineness: 1–100 µm
Material: SUS304, 316L stainless steel
contact us
Related Popular Products
Air (steam) filter
The filter uses a folded microporous membrane made of hydrophobic polytetrafluoroethylene (PTFE) or polypropylene (PP). The filter body is made of high quality imported stainless steel (304/316L) and is designed and manufactured in accordance with GMP requirements.
316L stainless steel filter element for beer wort aeration
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
Corrosion-resistant cartridge filter with fluoroplastic lining
PTFE-lined stainless steel filters are specially designed for filtering highly acidic, highly alkaline and other highly corrosive liquids. All parts of the filter in contact with the liquid are fully lined with PTFE to protect the stainless steel from corrosion.
Electrically heated breathing filter
The automatic breathing filter with heating and temperature control is designed in strict accordance with GMP requirements and is a high-tech product independently developed and manufactured by Wenzhou Weixian Light Machinery Co.,Ltd.
Filter without residual liquid
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Sintered metal powder filter disc
Powder sintered filtration materials (tubular and slab) are microfiltration elements made from titanium powder Ti and stainless steel grades 304, 304L, 316, 316L by fractionation, molding and sintering.
Pleat filter element made of polyvinylidene fluoride
The filtration membrane is made of polyvinylidene fluoride (PVDF). The structure with an internal support frame made of polypropylene or stainless steel is assembled by heat welding. The membrane has a unique pore shape, high resistance to contamination, resistance to acids and alkalis, and is suitable for gas filtration.
Fittings
Main products: Quick release ball valve; hygienic ball valve; quick release Y-o...
Three-in-one filter disc - filtration, washing, drying
The three-in-one filter disc for pharmaceutical equipment is a filter element that provides filtration, rinsing and drying (three in one).
Flat aerator
The product is made by welding from a spherical titanium aeration disk, a dense titanium plate and a dense titanium fitting. The spherical titanium aeration disc is sintered from high-purity titanium powder.
High performance filter
High performance filter designed for large diameter pipelines and high flow rates. It uses a stainless steel pleated filter element as a filter element, the filtration area of which is many times larger than the area of conventional perforated basket filter elements and rod pleated filter elements of competitors.
Composite sintered mesh with perforated sheet
Perforated sheet sintered mesh is a new type of filter media made by composite sintering a perforated sheet of standard material (304 or 316L stainless steel) and multiple layers of square mesh (or twill weave) into a single piece.
Hydrophobic pleated filter element made of polytetrafluoroethylene
The filtration membrane is made of polytetrafluoroethylene (PTFE). The structure with an internal support frame made of polypropylene or stainless steel is assembled using heat welding. The membrane has natural hydrophobicity, is resistant to strong acids and alkalis, high temperatures and ozone, and is designed for gas filtration.
Pipe filter
The filter is a compact device for removing small amounts of solid particles from liquids and is designed to protect compressors, pumps, instrumentation and other equipment, ensuring their normal operation.
Flat aerator
The product is composed of titanium filter plate, 316L stainless steel body, 316L stainless steel flange and aerator O-ring.
Stainless steel sintered felt pleated filter element - for melts, steam, heat resistant, high porosity
The main filter material of the pleated sintered felt filter element is sintered felt made of stainless steel fiber. Sintered felt made of stainless fiber is used as the core filter layer.
