Products
Protective housing of the temperature and humidity sensor - sintered filter element made of stainless steel powder
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
Description
marker
Product Description
316L stainless steel filter element for beer wort aeration, with quick release clamp connection, custom made.
— Diameter: 4–450 mm
— Length: 20–1500 mm
— Porosity: 30–40%
— Filtration fineness: 0.22–100 microns
Applications:
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering. It has high mechanical strength, heat resistance, excellent corrosion resistance, uniform pore distribution, good air permeability, cleanability and regeneration ability, weldability and machinability. These products are widely used for filtration and separation of gases and liquids in industries such as catalyst recovery, petroleum, chemical, pharmaceutical, food, beverage, metallurgy, environmental protection and fermentation industries, such as: coarse and fine filtration of liquids - pharmaceutical solutions, oils, beverages, mineral water, etc.; cleaning from dust, bacteria and oil mist of various gases and vapors; noise suppression, flame suppression, gas buffering, etc.
Product characteristics:
1. Shape stability, impact resistance and resistance to alternating loads are superior to other metal filter materials.
2. Stable air permeability and separation efficiency.
3. High mechanical strength, suitable for use in high temperature, high pressure and severe corrosion environments.
4. Particularly recommended for filtering hot gases (permissible temperature up to 500°C).
contact us
Related Popular Products
Heat Resistant Corrosion Resistant 316L Stainless Steel Filter Element
Sintered stainless steel powder filter element is manufactured by pressing stainless steel powder followed by high temperature sintering.
Hydrophilic pleated filter element made of polytetrafluoroethylene
The filtration membrane is made of hydrophilic polytetrafluoroethylene (PTFE). The product is assembled by heat welding with an internal support frame made of polypropylene or stainless steel. The hydrophilic membrane is resistant to strong acids and alkalis, high temperatures and ozone, suitable for clarifying and sterilizing filtration of highly corrosive, highly oxygenated liquids and organic solvents.
Sintered titanium powder filter element
Titanium rod filter elements (tubular and tile) are made from industrial high-purity titanium powder (99.4%).
Multi-cartridge microporous filter
The internal surface of the hygienic microporous membrane filter is mirror polished, which reduces the accumulation of contaminants and makes cleaning easier.
Flat aerator
The product is composed of titanium filter plate, 316L stainless steel body, 316L stainless steel flange and aerator O-ring.
Mobile filter
The horizontal bed sheet filter has a long history of use in food and beverage filtration. This filtration method belongs to depth filtration technology and is a modular closed system, especially suitable for low and medium flow rates.
Vulcanized plate, sintered stainless steel aeration plate, flanged filter disc, blast furnace coal dust fluidization plate, sintered stainless steel mesh filter disc
This unit is mounted on the fluidizer at the bottom of the purge tank or inside the pulverized coal hopper bottom fluidizer assembly.
Filter without residual liquid
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Modular filter
The horizontal bed sheet filter has a long history of use in food and beverage filtration. This filtration method belongs to depth filtration technology and is a modular closed system, especially suitable for low and medium flow rates. Sheet filters with an alluvial layer "Weixian" can be used with various types of filter cakes and are characterized by low cost. Surface treatment fully complies with hygienic requirements.
Electrically heated breathing filter
The automatic breathing filter with heating and temperature control is designed in strict accordance with GMP requirements and is a high-tech product independently developed and manufactured by Wenzhou Weixian Light Machinery Co.,Ltd.
Top loading bag filter
Characteristics The bag filters are entirely made of high quality stainless steel...
Flat aerator
The product is made by welding from a spherical titanium aeration disk, a dense titanium plate and a dense titanium fitting. The spherical titanium aeration disc is sintered from high-purity titanium powder.
Titanium rod filter
The filter housing is made of high quality 316L or 304 stainless steel, the outer and inner surfaces are mirror polished.
Three-in-one filter disc - filtration, washing, drying
The three-in-one filter disc for pharmaceutical equipment is a filter element that provides filtration, rinsing and drying (three in one).
Single cartridge membrane microporous filter
XHFILTER is a microporous pleated filter made entirely of SUS316L or SUS304 stainless steel, with a pleated filter element as the filter element.
Sintered metal powder filter disc
Powder sintered filtration materials (tubular and slab) are microfiltration elements made from titanium powder Ti and stainless steel grades 304, 304L, 316, 316L by fractionation, molding and sintering.
